Sw Board - Sony CDP-CX355 Service Manual

CDP-CX355
3-8. D. SW Board
Precaution during the gear (door.cam) installation
1 Move the slider (pop-up) and the lever (cam.pu) fully
in the direction of the arrow
A
slider (pop-up)
The levers of the two rotary switches on the D. SW board
are shown in the illustration below.
12
1 washer
2 gear (door.cam)
4 gear (door.drive)
.
A
lever (cam.pu)
two rotary switches
D. SW board
7 holder (L-SW)
6 two claws
3 washer
2 Install the gear (door.cam) in the direction shown
in the illustration and rotate it fully
in the direction of the arrow
3 When the gear (door.cam) happens to go too deep,
return it to the original position
in the direction of the arrow
5 two screws
(+BTP 2.6 x 6)
8 D. SW board
.
B
B
gear (door.cam)
C .
C