GE 29111 Series User Manual page 52

. Use the caller ID-volume ( 6 or 5) button to scroll to the
desired CID record.
. Press the memory button to display SELECT MEMORY
01-50.
. Use the touch-tone pad to enter a memory location to
store the number in that memory location. You will hear a
confirmation tone.
NOTE: If the memory location is occupied,
REPLACE MEMO? is displayed, and you must
confirm replacement by pressing the memory
button.
NOTE: Press the *tone/exit button once to keep
the previous setting (making no changes) and
return to the menu.
NOTE: If the selected CID record contains any
information that is non-numeric, the unit will not
allow this record to transfer to the internal user
memory. The handset will display UNABLE TO
STORE.
To Replace a Stored CID Record
1. Repeat steps 1 through  in Storing CID Records in Internal
Memory. After you enter the memory location, REPLACE
MEMO? shows in the display.
. Press the memory button again, and the new CID record
replaces the old memory in that location. You will hear a
confirmation tone.
5