Chapter 2.Installing Options; Removing The Support Bracket - IBM Netfinity 3500 M20 Installation Manual

Chapter 2. Installing Options

Removing the support bracket

Support bracket
© Copyright IBM Corp. 2000
This chapter provides the basic information needed to install hardware options in
your server. This section is for all users, but is written with the experienced user in
mind. If you need more detailed installation information, refer to the User's Reference
on the IBM Netfinity Documentation CD.
When working with some options such as hard disk drives, microprocessors, and
memory modules you must first remove the support bracket to access the location for
the option.
To remove the support bracket:
1. Remove the screw from the bottom front corner.
2. Pull the front corner of the bracket away from the server, then lift the bracket out
of the server.
3. Store the screw and bracket in a safe place.
0
3 5 0
i t y
t f i n
N e
0
M 2
5