Specifications - Sony STR-DE585 Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
40 – 20,000 Hz; rated 80 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (STR-DE485 area
code U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 40 Hz – 20 kHz, THD 0.09 %)
STR-DE585*:
STR-DE485:
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
STR-DE585*:
STR-DE485:
* Models of area code CA only.
Models of area code CEL,CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
STR-DE585:
STR-DE485E:
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
STR-DE585:
STR-DE485E:
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
STR-DE485:
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
STR-DE485:
GB
52
100 W + 100 W
80 W + 80 W
1)
FRONT :100 W/ch
CENTER 1) : 100 W
1)
SURR : 100 W/ch
1)
FRONT : 80 W/ch
CENTER 1) : 80 W
1)
SURR : 80 W/ch
2)
100 W + 100 W
2)
80 W + 80 W
2)
FRONT 1) :100 W/ch
1)
CENTER : 100 W
1)
SURR : 100 W/ch
FRONT 1) : 80 W/ch
1)
CENTER : 80 W
1)
SURR : 80 W/ch
2)
80 W + 80 W
2)
1)
FRONT : 100 W/ch
1)
CENTER : 100 W
1)
SURR : 100 W/ch
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
E2/E3, AU
SP, CEL, CEK, AR
TW
MX
Frequency response
MULTI CH IN
(STR-DE 585 and
STR-DE485 only),
CD, MD/TAPE, DVD/
LD, VIDEO 1, 2
Inputs (Analog)
MULTI CH IN
(STR-DE 585 and
STR-DE485 only),
CD, MD/TAPE, DVD/
LD, VIDEO 1, 2
3) INPUT SHORT (with sound field and tone
bypassed).
4) Weighted network, input level.
Inputs (Digital)
DVD/LD (Coaxial)
VIDEO 2 (Optical)
Outputs
MD/TAPE (OUT),
VIDEO 1
(AUDIO OUT)
SUB WOOFER
Tone
Gain levels:
FM tuner section
Tuning range
Antenna terminals
Intermediate Frequency
Power requirements
240 V AC, 50 Hz
230 V AC, 50 Hz
110 V AC, 60 Hz
120 V AC, 60 Hz
10 Hz – 50 kHz
+0.5/–2 dB (with sound
field, and tone bypassed)
Sensitivity: 250 mV
Impedance: 50 kilohms
3)
S/N : 96 dB
4)
(A, 250 mV )
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 250 mV
Impedance: 10 kilohms
Voltage: 2 V
Impedance: 1 kilohms
±6 dB, 1 dB step
87.5 - 108.0 MHz
75 ohms, unbalanced
10.7 MHz