Other Hookups - Sony STR-DE585 Operating Instructions Manual

Other hookups

Setting the voltage selector
If your receiver has a voltage selector on the
rear panel, check that the voltage selector is set
to the local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord
to a wall outlet.
VOLTAGE SELECTOR VOLTAGE SELECTOR
120V
GB
12
SPEAKERS SPEAKERS
IMPEDANCE USE 8 – 16Ω IMPEDANCE USE 8 – 16Ω
SURROUND CENTER
R L
R L
240V 220V
FRONT
R L
R L
AC power cord
Connecting the AC power
cord
Before connecting the AC power cord of this
receiver to a wall outlet, connect the speaker
system to the receiver (page 13).
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
b
To a wall outlet