Sharp LC-15S4U-S Service Manual page 24

LC-15S4U-S
2. How to exit Public Mode
There are the following ways to quit the public mode setup screen.
» Turn off "PUBLIC MODE" in the adjustment process mode. ( ) ← This way alone is not for quitting the setup
» Turn off the power with the "POWER" key. ( )
» Select "ENTER". ( )
» Move the cursor to "RESET" and press the "FLASHBACK" key. (Back to the normal mode screen)( )
... "PUBLIC MODE" stays on in the adjustment process mode.
... The settings will be back to the factory ones.
3. Public Mode Setting Values
» With the factory settings made, the public mode settings get initialized. (The adjustment process remains intact.)
4. Public Mode Menu
The guidance is not displayed onscreen.
Setup procedure
» To move the cursor up and down, use the "cursor UP/DOWN" key (remote controller) and "CH (ù)/(Ù)" key
(remote controller and set).
» To change the settings, use the "cursor RIGHT/LEFT" key (remote controller) and "VOL (+)/(–)" key (remote
controller and set).
» To save new settings, keep the cursor at "Enter" and use the "cursor RIGHT/LEFT" key (remote controller) and
"VOL (+)/(–)" key (remote controller and set).
Public mode
Power on fixed
Maximum volume
Volume fixed
Volume fixed level
RC button
Panel button
Menu button
On screen display
Input mode start
Input mode fixed
Reset
Enter
[Variable ]
[ 60 ]
[Variable ]
[ 20 ]
[Respond ]
[Respond ]
[Respond ]
[Yes ]
[Normal ]
[Variable ]
24
screen, but for quitting the mode itself.