Specifications - Sharp MD-C2 Service Manual

FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
MD-C2
MiniDisc recorder section
Type: 3-disc multi-play MiniDisc re-
corder
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
Audio channel: Stereo; 2 channels
Monaural (Playback only);
1 channel (long-time recording
mode)
Frequency
response: 20 - 20,000 Hz
Rotation speed: 400 - 900 rpm CLV, Approx
Quantization: 16-bit linear (CD recording)
20-bit linear
(Analogue recording)
Error correction: ACIRC (Advanced Cross Inter-
leave Reed-Solomon Code)
Coding: ATRAC (Adaptive TRans-
formed Acoustic Coding)
Recording method: Magnetic field modulation over-
write method
D/A converter: 1-bit D/A converter
Sampling frequency: 44.1 kHz
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range: 90 dB (1 kHz)
Compact disc player section
Type: 3-disc multi-play compact
disc player
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
Rotation speed: 200 - 500 rpm CLV, Approx.
Error correction: CIRC (Cross Interleave Reed-
Solomon Code)
Quantization: 16-bit linear
D/A converter: 1-bit D/A converter
Frequency
response: 20 - 20,000 Hz
Signal/noise ratio: 95 dB (1 kHz)
Dynamic range: 90 dB (1 kHz)
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
Tuner section
Frequency range: FM; 87.5 - 108 MHz
AM; 530 - 1,720 kHz
Sensitivity: FM; 2.5 V
AM; 650 V/m

SPECIFICATIONS

(75 ohms unbalanced)
Cassette deck section
Type: Compact cassette tape
Frequency response: 50 - 14,000 Hz (Normal tape)
Motor: DC motor with electronic governor
Signal/noise ratio: 50 dB (Recording/Playback)
Bias and erasure
system: AC
Tape speed: 1-7/8 ips. (4.76 cm/sec.)
Wow and flutter:
0.15 % (WRMS)
Heads: Record/playback
Erase
General
Power source: AC 120 V, 60 Hz
Power consumption: Stand-by; 0.6W
Power on; 112W
Output power: 50 wats minimum RMS per channel
into 6 ohms from 60 Hz to 20 kHz,
10% total hamonic distortion
Input terminals: Auxiliary (Analogue);
500 mV/47 kohms
Output terminals: Headphones; 16 - 50 ohms
(recommended; 32 ohms)
Speakers; 6 ohms
Dimensions: Width; 10-11/16" (270 mm)
Height; 13-7/8" (352 mm)
Depth; 14-13/16" (376 mm)
Weight: 19.0 lbs. (8.6 kg)
CP-MDC2
Speaker section
Type: 3-way type [5" (130 mm) woofer,
2-1/2" (50 mm) tweeter and super
tweeter]
Maximum input power: 100 W
Rated input power: 50 W
Impedance: 6 ohms
Dimensions: Width; 8-11/16" (220 mm)
Height; 13-7/8" (352 mm)
Depth; 10-1/4" (260 mm)
Weight: 7.1 lbs. (3.2 kg)/each
Specifications for this model are subject to change without
prior notice.
– 3 –
MD-C2
1
1
1