Sharp MD-X60 Service Manual page 14

MD-X60
How to remove the sled motor/loading motor
(See Fig. 14-1)
1. Remove the screws (D1) x 4 pcs., and remove the sled
motor/loading motor.
Caution:
Be careful so that the gear is not damaged.
(The damaged gear emits noise during searching.)
How to remove the spindle motor
(See Fig. 14-2)
1. Remove the screws (E1) x 3 pcs., and remove the spidle
motor.
Caution:
Be careful so that the turntable is not damaged.
How to remove the optical pickup
(See Fig. 14-3)
1. Remove the screws (F1) x 3 pcs.
Caution:
Be careful so that the gear is not damaged.
(The damaged gear emits noise during searching.)
(D1)x2
Ø1.7x2mm
Gear
Loading
Motor
Gear
Turntable
(F1)x3
Ø1.7x9.5mm
Gear
– 14 –
(D1)x2
Ø1.7x2mm
Sled
Motor
Figure 14-1
Spindle Motor
(E1)x3
Ø1.7x2.5mm
Figure 14-2
Optical Pickup
Figure 14-3