Power light
On
Red
Red or flashing
red
Red
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Related tasks
Cleaning the Air Filter
Replacing the Air Filter
Replacing the Lamp
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1. Turn on the projector.
2. Press the Help button on the projector or the remote control. Press the Help button on the remote
control.
You see the Help menu.
Lamp
Temp light
light
Flashing
Off
orange
Off
Flashing red
Flashing
Flashing red
red
Off
Off
Solving Problems
Filter light Status and solution
Off
The lamp is past its replacement period and
needs to be replaced to avoid damage. Do
not continue using the projector.
Off
A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson
for help.
Off
Internal projector error or air exhaust vent
error. Turn the projector off, unplug it, and
contact Epson for help.
Flashing
The air flow sensor has a problem. Turn the
red
projector off, unplug it, and contact Epson
for help.
168