Specifications - Sanyo VCC-HD5400P Service Manual

SPECIFICATIONS

Camera
Image pickup device : 1/2.5-inch CMOS sensor
Effective pixels : 16:9 1920 (H) x 1080 (V), 4:3 1600 (H) x 1200 (V)
Lowest image illumination : 50IRE: 2.0 lx (at F1.8, color mode, high gain)
Lowest image illumination : 50IRE: 0.1 lx (at F1.8, black-and-white mode, high gain)
Video S/N ratio : 50 dB (when AGC is "OFF")
Lens : Focal length: f=6.3 - 63 mm, F number: F1.8 -2.5
Optical zoom 10x, electronic zoom 16x (up to 160x when used in combination with the optical zoom)
Rotational scope : Pan: 360° endless pan Tilt: -20 to +200°
Rotation speed : Pan: Max. 350°/sec Tilt: Max. 350°/sec (0.1° - 120°/sec for manual operation)
Preset position : Max. 256
Auto mode : Sequential, auto pan, tour, automatic return
Day/Night function : Auto, color, black-and-white, alarm input switching
White balance : Auto (ATW), one push (AWC), manual (R/B gain adjustable),indoor, outdoor, fluorescent
Backlight compensation : Multi-spot evaluative metering, center-weighted evaluative metering, masking, face detection
Electronic sensitivity boosting : Auto (32 x max) or Off
Electronic shutter : 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (VCC-HD5400P, VCC-HD5400PC)
Electronic shutter : 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (VCC-HD5400)
Electronic shutter : Long exposure shutter (1x, 2x, 4x, 8x, 16x, 32x)
Iris : AUTO/MANUAL (electronic iris: ON/OFF)
Camera settings : Up to 8 patterns of monitoring conditions are configurable
AGC gain : Normal/ Middle/ High (Manual gain setting possible at Off)
Gamma correction : 0.45, 1, Mode 1, Mode 2
Aperture compensation : On/Off (Correction level adjustable)
VIVID COLOR EFFECT : ON/OFF
DNR (digital noise reduction) : ON/OFF
Image inversion : H/V/HV/OFF
Privacy mask : On/Off, up to 32 positions
Motion sensor : On (detection area setting, video analytics)/ Off, face detection function
Auto pursuit : On/Off
Sway compensation : On/Off
Language selection : English, French, German, Spanish, Japanese
I/O
Video output : HD output: HDMI terminal (TYPE C)
Monitor output: BNC terminal (MONITOR OUT)
LAN : 10BASE-T/ 100BASE-TX (RJ-45 connector)
EX-HDD connector : For connecting an external hard disk drive case
SD card slot : 1 (SDHC compliant, max.32GB supported)
Alarm input : 4 (NO/NC), also used for switching between day and night modes
Alarm output : 2 (NO/NC 16V, 150 mA, open collector)
Audio input/ output : Audio input (white: 3.5-mm mini jack)
Audio input/ output : Audio output (black: 3.5-mm mini jack)
Communication method:RS-485
Protocol : SSP, PELCO-D
Baud Rate : 2400, 4800, 9600, 19200
Address :1 - 255 (sanyo SSP: 1 to 127)
- -
3