Panasonic CF-H2 series Operating Instructions Manual page 23

n Starting Up
The.date.and.time.are.
incorrect.
[Executing.Battery.
Recalibration].screen.appears.
[Enter.Password].does.not.
appear.when.resuming.from.
sleep.( )./standby
( ).or.hibernation.
Cannot.resume.
The.error.message."Debug.
Assertion.Failed!".appears.
l. Make.the.correct.settings.
.
Click (Start).-.[Control.Panel].-.[Clock,.Language,.and.Region].-.[Date.and.Time].
.
Click.[start].-.[Control.Panel].-.[Date,.Time,.Language,.and.Regional.Options].-.[Date.
and.Time].
l. If.the.problem.persists,.the.internal.clock.battery.may.need.to.be.replaced..Contact.
Panasonic.Technical.Support.
l. When.the.computer.is.connected.to.LAN,.check.the.date.and.time.of.the.server.
l. The.2100.A.D..or.later.year.will.not.be.correctly.recognized.on.this.computer.
l. The.Battery.Recalibration.was.canceled.before.Windows.was.shut.down.last.time..To.
start.up.Windows,.turn.off.the.computer.by.the.power.switch,.and.then.turn.on.
l. The.password.you.have.set.in.the.Setup.Utility.is.not.requested.at.resuming..To.use.the.
password.security.at.resuming,.set.the.Windows.password.
A. Click (Start).-.[Control.Panel].-.[User.Accounts.and.Family.Safety].-.[Add.or.
remove.user.accounts].and.select.the.account,.and.set.the.password.
B. Click (Start).-.[Control.Panel].-.[System.and.Security].-.[Require.a.password.when.
the.computer.wakes].and.add.a.check.mark.for.[Require.a.password].
.
A. Click.[start].-.[Control.Panel].-.[User.Accounts].and.select.the.account,.and.set.the.
password.
B. Click.[start].-.[Control.Panel].-.[Performance.and.Maintenance].-.[Power.Options].-.
[Advanced].and.add.a.check.mark.for.[Prompt.for.password.when.computer.resumes.
from.standby].
l. An.error.may.occur.when.the.computer.automatically.enters.the.
standby.( )
turn.off.the.screensaver.or.change.the.pattern.of.the.screensaver.
l. If.you.press.and.hold.the.power.switch.for.4.seconds.or.longer,.the.power.will.be.turned.off.
forcibly.and.the.computer.will.not.resume..In.this.case,.all.unsaved.data.will.be.lost.
l. You.disconnected.the.AC.adaptor.and.the.battery.pack.while.the.computer.was.in.
( )./.standby.(
sleep.( )./.standby.(
will.not.resume.
l. The.battery.is.exhausted..
consume.some.power.
●.This.error.message.may.appear.in.the.following.cases.
. When.you.log.on.to.Windows.for.the.first.time.after.setting.up.Windows.with.First-time.Operation.
. When.you.create.a.user.account,.and.log.on.to.Windows.for.the.first.time.using.that.account.
. When.you.log.on.to.Windows.for.the.first.time.after.changing.[Trigger.Mode].in.
[Advanced].-.[Serial.Port.Settings].of.the.Setup.Utility.
In.such.case,.click.[Retry],.and.then.click.[Retry].on.the.next.error.message..The.same.
error.will.not.occur.again.after.performing.this.operation.
.or.hibernation.mode.while.the.screensaver.is.active..In.this.case,.
)
..If.the.computer's.power.supply.is.disconnected.in.
) ,.unsaved.data.will.be.lost.and.the.computer.
Sleep.( )./.standby.(
sleep.( )./.
sleep.
)
.and.hibernation.
23