Nostalgia Electrics RKP-630 Instructions Manual page 4

ENGLISH 3
USING YOUR RETRO KETTLE POPCORN MAKERTM
(Continued)
Your RETRO KETTLE POPCORN MAKER
fM
needs little assembly. The Stainless Steel kettle - - - - - - - 1....
needs to be securely inserted in the support
brackets hanging from the top inside the unit. The
side of the kettle with the inverted threads needs to
be on the right side of the machine. This is the
same side with the small round hole in the glass. This is where the crank handle
will enter to screw in and connect to the kettle. (See page 3, Illustration A for
positioning of crank handle.)
Now you are ready to enjoy fresh, hot and tasty theater style popcorn from your
RETRO KETTLE POPCORN MAKERTM.
USING YOUR RETRO KETTLE POPCORN MAKERTM
1. First, find a flat surface near an electrical outlet before starting. (Make
sure your cord is away from any water source. If needed, it is acceptable to use
an extension cord.)
Gather your popcorn making supplies; popcorn, seasonings, bowls or bags tor holding the
popcorn, cooking oil. measuring cup and spoon. (Measuring cup and spoon are included
with your unit).
2. Plug in your unit in the OFF position.
3. Make sure kettle is properly secured in support brackets.
4. Make sure kettle motor is plugged in.
5. Turn unit ON by flipping the switch on the top of the machine. (See Illustration A
below for location of switches). Allow the unit to run 3-5 minutes to heat up kettle.
Turn unit OFF.
On/Off and light switches
from outside
AA
Crank handle connects to kettle........
~
6. By using the oil-measuring spoon supplied with your RETRO KETTLE POPCORN
MAKERTM, add 2 teaspoons of your favorite popcorn cooking oil to the kettle.
7.
Add :4 cup of popcorn kernels to the kettle.
I