Lcd Backlight Dimming Shift Code; Button Confirmation Tone Shift Codes; Lcd Backlight Color Shift Codes; Scan Set Shift Codes - Audiovox SRSIR-001 Owner's Manual

LCD BACKLIGHT DIMMING SHIFT CODE

To enable the LCD backlight dimming feature:
1. Enter shift code 36.
2. Use the Up and Down directional buttons to increase or
decrease display dimming, respectively.
3. Press the SFT button to exit LCD backlight dimming mode.
BUTTON CONFIRMATION TONE SHIFT CODE
.
Normally, a beep confirmation tone is heard each time a button is pressed
on the SCU. To silence this confirmation tone:
1. Enter code 40.
2. To turn the beep tone on again, enter code 41.

LCD BACKLIGHT COLOR SHIFT CODES

The backlight color for the LCD display can be either Green or Amber; to
select the desired color, enter one of the following codes:
1. Green------51
2. Amber----52

SCAN SET SHIFT CODES

To invoke the Scanning mode of Normal Preset or Normal Non-Preset
channels (in Normal mode only):
1. Normal Channel Scan-----60: Operation in normal mode, whereby
channels can be scanned in sequential order, up or down.
2. Preset Channel Scan------61: Operation in this mode makes channel
scanning possible only within the same category or group.

CHANNEL/CATEGORY SELECTION SHIFT CODES

To invoke the Channel(Normal)/Category selection mode:
1. Normal (SIRIUS Default Mode)-----80: Operation in normal mode,
whereby channels can be selected in sequential order, up or down.
"SIRIUS" Will be displayed in the lower portion of the LCD Screen.
2. Category------81: Operation in this mode makes channel changing
possible only within the same category or group.
This Manual: http://www.manuallib.com/file/2669411

CHANNEL SKIP SHIFT CODE

If you wish to prevent acquisition of a particular channel during the chan-
nel selection process:
1. Recover Skipped Channels----90: Regain access to the channel by using
the direct selection method to select the skipped channel; then enter code
90. (SFT+090+SFT) NOTE: This function can only be selected when
directly accessing the channel(s) to be skipped.
2. Skip Channel----91: The channel will be skipped over during
channel selection. (SFT+091+SFT)
3. Current Channel Parental Lock Out----92: Lock Out the current
channel so that it may only be accessed with a chosen password.
(SFT+092+SFT) NOTE: This function can only be sellected when
directly accessing the channel(s)to be locked out.
4. Parental Lock Out Security Code Change----93: This code allows
the user to change the Lock Out Security Code . (SFT+093+SFT)
5. Release Parental Lock Out----94: This code is used to Release the
current Locked channel. (SFT+094+SFT)
6. Initialize Security Code ----98: This code is used to set and use a
security code (password) into memory.(SFT+098+SFT) When this code is
entered, "ENTER MASTER CODE" will be displayed.
NOTE: DEFAULT SECURITY CODE = 0000
SYSTEM MASTER CODE = 1234

DISPLAY MESSAGES

When problems are encountered during SIRIUS ® system operation, a
message may appear on the display. The following table outlines the
most common problems and provides a probable cause(s) for each and
a suggested corrective action(s) to restore normal operation.
9
128-6374
9 of 12