Sony SLV-975HF Operating Instructions Manual page 62

Setting the timer manually (continued)
3
Press CURSOR / to confirm the setting.
The cursor appears at the beginning of the line. To enter another
• CURSOR
setting, move the cursor to the next line and repeat step 2.
4
• EXECUTE
Press EXECUTE.
5
Press POWER to turn off the VCR.
• POWER
The TIMER indicator on the VCR lights up and the VCR stands by
for recording.
When using a cable box, leave it on.
Daily/weekly recording
In step 2 above, press CURSOR . to select the recording pattern. Each time
you press CURSOR ., the indication changes as shown below. Press
CURSOR > to change the indication in reverse order.
the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT .....
n EVERY MON n EVERY SUN n 1 month later n (cycles backward) n
the current date
Tips
• To set the channel, you can also use the CH +/– or number buttons.
• To set the tape speed, you can also use TAPE SPEED.
• When you are recording a program in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 72).
• To lock the VCR after setting the timer, see page 60.
Note
• If you are using cable box control, you cannot select "L1" or "L2."
62
Basic Operations
SLV-975HF 3-858-120-11 (1)