Table of Contents
Advertisement
Additional tasks
To
Press
Stop play
p STOP
Pause play
P PAUSE
P PAUSE or · PLAY
Resume play after pause
Search forward
) FF during playback
Search backward
0 REW during playback
Fast-forward the tape
) FF during stop
Rewind the tape
0 REW during stop
Eject the tape
6 EJECT
To skip playback
You can skip a portion of playback you don't want to watch such as a
commercial and restart playback by pressing a single button.
1
Press SMART CUE during playback of the scene you want to skip. The
VCR starts searching.
2
Press SMART CUE again when you find the scene you want to watch.
The VCR stops searching, rewinds a few seconds, then resumes normal
playback.
If you press and hold SMART CUE while the VCR is skip searching, the VCR
will stop searching, and continue rewinding until you release SMART CUE.
Tip
• You can change the length of rewinding time on the ADVANCED OPTION menu.
See page 72.
To use the time counter
At the point on the tape that you want to find later, press COUNTER RESET.
The counter in the display window resets to "0H00M00S." Search for the
point afterwards by referring to the counter.
H
M
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• The counter resets to "0H00M00S" whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
S
Basic Operations
SLV-975HF
3-858-120-11 (1)
53
Advertisement
Table of Contents
