General; Setting The Clock - Sony ICF-M410L Service Manual

Telescopic Antenna
v jack
DC IN 4.5V

Setting the Clock

The display will flash "0:00" when the batteries are
installed or the AC power adaptor is plugged in for
the first time.
The clock can be adjusted when the radio is off.
1
To stop flashing of the display, press
CLOCK (mb/CLOCK for ICF-M410S).
2
While holding down CLOCK, turn
TUNE/TIME SET to set the clock to the
current time.
When you turn the control knob a little to
, the clock digits move forward or back one
by one, and when you turn the control knob
further to
rapidly.
When you release CLOCK, the clock starts
operating, and ":" starts flashing.
24-hour system : "0:00" = midnight, "12:00" =
noon
SECTION 1

GENERAL

*
or , the clock digits move
This section is extracted
from instruction manual.
TUNE/TIME SET
VOL
or
ICF-M410L
3