Panasonic Lumix DMC-L10K Operating Instructions Manual page 98

Menu Settings
[NEXT]: Advance to the next
picture.
[RETAKE]: Return to the first picture.
[EXIT]: Record the image of the
first picture, and finish the
multiple exposure
picture-taking session.
4 Decide on the composition, and
take the third picture.
E
E When taking pictures using the Live
View
• After taking the picture, the images of
the first, second and third pictures
taken will be superimposed over one
another and displayed.
• Press 3/4 to select [RETAKE] and
then press [MENU/SET] to return to
the third picture.
5 Press 4 to select [EXIT] and then
press [MENU/SET].
F
F After the third picture has been taken
• You can also press the shutter button
halfway to finish.
• The images up to the third picture
taken are recorded, and the multiple
exposure picture-taking session will be
completed.
98
VQT1G46
∫ About automatic gain control setting
Select [AUTO GAIN] on the screen shown
1
in step and set it.
[ON]: The brightness level is
adjusted according to the
number of pictures taken
and the pictures are
superimposed over each
other.
[OFF]: Compensate the
exposure to match the
subject so that all the
superimposed exposure
effects will be just right.
• The recording information displayed for
pictures taken with multiple exposures is
the recording information for the last
picture taken.
• If [MENU/SET] is pressed while taking
pictures, the photographed images are
recorded, and the multiple exposure
picture-taking session will be completed.
• We recommend setting the [O.I.S.] switch
on the lens to [OFF] and using a tripod if
taking pictures with multiple exposures.
• The multiple exposure setting is released
at the following times:
– When the power has been turned off
(including power save mode)
– When the card has been changed
– When the USB connection cable has
been connected to the camera
• Some functions have restrictions. You will
not be able to use the following functions:
– Burst mode
– Auto bracket mode
– Extra optical zoom
– Digital zoom