Panasonic Lumix DMC-L10K Operating Instructions Manual page 118

Connecting to other equipment
1 Turn on the camera and the
printer.
2 Connect the camera to a printer
via the USB connection cable
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [2] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at C
and insert straight in or take straight
out.
3 Press 4 to select
[PictBridge (PTP)] and then press
[MENU/SET].
USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
SELECT SET
• If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a Printer. (P27)
• Do not use any other USB connection
cables except the supplied one.
• If you want to print the age in [BABY1]/
[BABY2] or [PET] in scene mode, use the
software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the
PC.
118
VQT1G46
∫ Single picture
1 Press 3 to select
[SINGLE PICTURE] and then
press [MENU/SET].
2 Press 2/1 to select the picture
and then press 4.
• The message disappears in about
MENU
2 seconds.
/SET
MENU
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
PictBridge
SINGLE PICTURE
DPOF PICTURE
MENU
MENU /SET
SELECT SET
PictBridge
100 0001
-
1/19
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
MENU
PRINT EXIT
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS 1
PAPER SIZE
PAGE LAYOUT
MENU
MENU /SET
CANCEL SELECT SET