Infinity ERS 840 Installation Manual page 7

Installing ERS Series Speakers (cont'd)
ERS 840 installed in wall
Figure 4. The mounting frame sandwiches the speaker baffle to the
wallboard. The ERS 840 is shown here.
6. (Optional) Place paint masks over the speakers before painting
the speaker's frame. Paint the grilles before inserting them onto
the frames. Be careful not to get paint on the speakers or let it
clog the holes in the grilles. Let the paint dry thoroughly before
performing the next step.
NOTE: If you want to cover the grille with an acoustically-
transparent cloth instead of paint, apply a small amount of grille
cloth adhesive around the inside edges of the grille and wrap the
cloth smoothly around it. After drying, trim any excess cloth from the
grille. Consult your Authorized Infinity ERS Series dealer for
additional help with this option.
6
Place I
nfinity Logo (self-adhesive)
in lower right corner of grille
Wallboard
Frame
Presses
Wallboard
Side View