Moen CHATEAU L4621 Series Specifications

There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal or 50/50 pop-up type waste assembly where noted
OPERATION
• Pivot action lever style handle
• Temperature controlled through 100˚ degree arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1 and
all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
DECK PLATE
1-3/4"
(45mm)
MAX.
4"
(101mm)
1/2" IPS
ADAPTER
(25mm)
ESCUTCHEON WIDTH
Rev. 3/11
TOP OF
MOUNTING
SURFACE
SPACER
PROVIDED –
DISCARD IF
Lift
MOUNTING
Rod
SURFACE IS
MORE THAN
2" 2"
3/4" THICK
(25mm)
6-1/8" (156mm)
CRITICAL DIMENSIONS
S p e c i f i c a t i o n s
Single-Handle Lavatory Faucet
Bulk Pack Models (12 Per Carton):
Bulk Pack Model (12 Per Carton): L64621 series
Bulk Pack Model (12 Per Carton):
NOTE:
IN STALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
2"
(51mm)
4-3/8"
(111mm)
(51mm)
WIDTH
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
CHATEAU®
with Metal Waste Assembly
Models: L4621 series
L64620 series
with 50/50 Waste Assembly
Less Waste
Model: L4601 series
L64601series
THIS FAUCET IS DESIGNED TO BE
7" (178mm)
OPEN POSITION
2"
ESC.
www.moen.com