Speaker Installation - OWI 2X2AMP-R2S61 User Manual

Hide thumbs

Table Of Contents

Table of Contents

OWI User Manual: Model 2X2AMP-R2S61/62/64 Speaker Amplifier

NOTE: Installation is to be completed by a qualified electrical technician according to

NEC/CEC code and applicable local codes.

Installation Instructions for

The 2X2AMP-R2S61 carton includes:

1. One (1) each 2X2AMP-R2S61 (2 Source Amplified Speaker on a 2X2 Tile and

Backcan)

2. One (1) each UL Listed, Level 5

3. One (1) each User Manual

The 2X2AMP-R2S61 Combination carton includes items 1 to 3 above plus the following:

1. 8 ohms in-ceiling speaker on a 2X2 Tile and backcan Model 2X2IC6NA

*Note: Quantity of 8 Ohms Ceiling speakers ON A 2x2 tile depends on the SKU of the 2X2AMP-R2S61

Combination Program.

Speaker Placement

Before installing your OWI speakers, consider the placement carefully, taking into effect the

location of electrical, plumbing and other fixtures.

Placement in Ceiling

OWI speakers should be located above the primary listening area.

Mounting your OWI speakers

Determine the best area to mount your OWI speakers. It will be necessary to run your speaker

wires to that location. This location must be free of obstructions, such as electrical conduits,

HVAC ducts, or water lines.

Be sure that there is at least a 5 inches clearance behind the mounting surface. Make sure

that no objects block the back of the speaker.

Remove the round cardboard disc from the template supplied and keep it for later use as a

paint mask, if you decide to paint your speakers.

Once you have determined there are no obstructions in your desired mounting location route

the speaker wires from your amplifier to your opening. Avoid routing the speaker wire near

electrical wires. If you have to run them parallel, make certain to space the speaker wires at

least 2 feet from the AC line. Do not nail or staple the speaker wire.

OWI INC.