Specifi Cations; Chapter 4 Programming Your Remote Control; Introduction; Programming A Device - Polaroid FLM-3234B User Manual

Specifi cations
MODEL
FLM-3732/FLM-3734B
LCD Panel Panel Size 37'' TFT LCD
Brightness 500
Contrast Ratio 1000:1
Max. Resolution 1366x768
Input Connector VIDEO/AUDIO(L/R) 2
S-VIDEO/AUDIO(L/R) 1
YPbPr/AUDIO(L/R) 2
VGA/AUDIO(L/R) 1
HDMI/AUDIO(L/R) 1
AUDIO OUT(L/R) 1
OPTICAL/COAXIAL 1
HEADPHONE 1
Power Source AC100~240V, 50/60HZ, 3.0A
Power Consumption 275 W, standby < 8 W
Dimension 36.6 w x 28.2 h x 9.4 d inch
WEIGHT 54 LB
44
Chapter 4 Chapter 4
Programming your Remote Control Programming your Remote Control

Introduction

Introduction
Your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can Your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can
program the remote to control your Universal TV, VCR or DVD, Cable or Satellite Receivers, Amplifi er or Tuner, program the remote to control your Universal TV, VCR or DVD, Cable or Satellite Receivers, Amplifi er or Tuner,
and Auxiliary devices. To do so, follow the instructions in "Programming a Device". For best results, please read and Auxiliary devices. To do so, follow the instructions in "Programming a Device". For best results, please read
and follow all the remaining instructions. Keep this guide for future referenc and follow all the remaining instructions. Keep this guide for future referenc
A Quick Look at Programming a Device A Quick Look at Programming a Device
To control VCR or DVD, Cable or Satellite Receivers, Amplifi er or Tuner, and Auxiliary devices, follow these steps. To control VCR or DVD, Cable or Satellite Receivers, Amplifi er or Tuner, and Auxiliary devices, follow these steps.
Before proceeding, fi nd the codes for the devices you want to program in "Manufacturer's Codes" on the right side Before proceeding, fi nd the codes for the devices you want to program in "Manufacturer's Codes" on the right side
of this page and write them down or highlight them. of this page and write them down or highlight them.
NOTE: NOTE:
To program a DVD Player, TV/DVD Combo, TV/VCR/DVD Combo, portable DVD player, or mobile DVD To program a DVD Player, TV/DVD Combo, TV/VCR/DVD Combo, portable DVD player, or mobile DVD
player, use the DVD key. player, use the DVD key.
1. 1.
Turn on the device (for example, DVD player) and, if needed, load media (for example, a DVD). Turn on the device (for example, DVD player) and, if needed, load media (for example, a DVD).
2. 2.
Press a device key (VCR/DVD, CBL/ SAT, or AUX). Press a device key (VCR/DVD, CBL/ SAT, or AUX).
3. 3. Press and hold SET until the red LED blinks twice; then release. Press and hold SET until the red LED blinks twice; then release.
4. 4. Enter the fi rst fi ve-digit code for your device. The LED blinks once as each digit is entered. If the code is Enter the fi rst fi ve-digit code for your device. The LED blinks once as each digit is entered. If the code is
correct, the LED blinks twice. correct, the LED blinks twice.
• • NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again. NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.
5. 5. Aim the remote at the device and press Power. The device should turn off. If it does not, repeat steps Aim the remote at the device and press Power. The device should turn off. If it does not, repeat steps
3–5, trying each code for your brand until you fi nd one that works. If you cannot fi nd a code that works, 3–5, trying each code for your brand until you fi nd one that works. If you cannot fi nd a code that works,
see "Searching for Your Code". see "Searching for Your Code".
6. 6. Repeat steps 1–5 for the other devices you want to control. For future reference, write down each Repeat steps 1–5 for the other devices you want to control. For future reference, write down each
working device code below: working device code below:
AUX Code: AUX Code:
CBL Code: CBL Code:
CD Code: CD Code:
DVD Code: DVD Code:
SAT Code: SAT Code:
TNR Code: TNR Code:
VCR Code: VCR Code:
7. 7. Press set to save and exit Press set to save and exit
Searching for your Code Searching for your Code
If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not
listed, try searching for your code: listed, try searching for your code:
1. 1. Press a device key once. Press a device key once.
2. 2. Press and hold SET until the red LED blinks twice; then release. Press and hold SET until the red LED blinks twice; then release.
3. 3. Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio). The LED blinks twice. Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio). The LED blinks twice.
4. 4. Aim the remote at the device and press Power. The remote sends IR codes from its library to the Aim the remote at the device and press Power. The remote sends IR codes from its library to the
selected device, starting with the most popular code fi rst. If the device responds, go to step 7. selected device, starting with the most popular code fi rst. If the device responds, go to step 7.
5. 5. If the device does not respond, press CH+. The remote will try the next code. Continue until the If the device does not respond, press CH+. The remote will try the next code. Continue until the
device responds. device responds.
• • Note: Press CH- to try the previous code. Note: Press CH- to try the previous code.
6. 6. To search for other device codes, repeat steps 1 to 5. To search for other device codes, repeat steps 1 to 5.
7. 7. Press SET to save and exit. Press SET to save and exit.
Checking the Codes Checking the Codes
If you have set up the remote using the procedure in "Searching for Your Code", you may need to fi nd out which If you have set up the remote using the procedure in "Searching for Your Code", you may need to fi nd out which
four-digit code is operating your equipment. four-digit code is operating your equipment.
For example, to fi nd out which code is assigned to your TV: For example, to fi nd out which code is assigned to your TV:
1. 1. Press TV once. Press TV once.
e. e.
A A