MSI A88X-G45 User Manual page 79

▶ CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than needs
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
▶ OC Retry Count [1]
Resets counts for overclocking retrying. When overclocking has failed, setting this
item as [1, 2, 3] will allow system to reboot 1, 2, 3 times with the same overclocked
configuration. If overclocking has failed every time, the system will restore the defaults.
▶ CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key features
does the installed CPU support. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory.
▶ CPU Features
Press <Enter> to enter the sub-menu.
▶ AMD Cool'n'Quiet [Auto]
Enabled or disabled AMD Cool'n'Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool'n'Quiet function. The Cool'n'Quiet technology
can effectively and dynamically lower CPU speed and power
consumption.
[Disabled] Disables this function.
Important
When adjusting CPU Ratio, the Cool'n'Quiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD Cool'n'Quiet as Disabled to retain the default CPU core speed.
3-17 BIOS Setup