Haier LE28M600 Owner's Manual page 28

NOTE:
1).Tint is available in NTSC system only.
2).There are four color temperature modes
can be selected, such as
3).Screen is available in PC mode only, which
can adjust horizontal position, vertical position,
size and phase.
4).The "Just Scan display mode" in Aspect Ration
can only use in HDMI and YPBPR out put.
3. SOUND MENU
The third item of the MENU is the SOUND
MENU.
You can adjust the sound effect here such as
treble, bass, balance etc.
Press ▼▲ to move, press OK button to confirm,
and press◀▶ to adjust.
Sound
Mode
CHANNEL
Standard
Balance
PICTURE
Auto Volume
SOUND
Surround Sound
TIME
OPTION
Note:
Auto volume: only available when the input
signal volume is too large or distortion.
4. TIME MENU
The forth item of the menu is the TIME MENU
You can adjust the clock, power on/off time,
sleep time etc.
Press▼▲to move, press OK button to confirm,
and press◀▶to adjust.
Clock
CHANNEL
PICTURE Off Time
On Time
SOUND
Sleep Timer
Auto Sleep
TIME
OPTION
NOTE:
Within 15 minutes there is no signal, the TV
will auto sleep.
Once you power off the TV set by AC, the clock time
will be reset.
5. OPTION MENU
The fifth item of the MENU is the OPTION MENU.
You can adjust the OSD language, Restore factory
default, Blue Screen or
Normal/Warm/Cool/User.
Music Movie Sports
Back Move
MENU OK
OK
Back Move
MENU OK
HDMI CEC .
CHANNEL
PICTURE
SOUND
TIME
OPTION
NOTE:
Restore factory default will clear all the programs
and Reset all the settings to default value.
6. USB FUNCTION
You must enter the Source menu first,then choice the
USB and press OK button,the USB menu will appear.
User
OK
PHOTO
OK
Please make sure that the USB device have plugged in
the slot. There are four type media item can be selected,
such as photo, music, Movie and text. Select the type
media item by pressing◀▶, press OK button to enter
the disk selection menu.
In the movie mode, when you use FB, FF function, The
audio may be pause in several seconds to synchronize
the audio signal and video signal.
In text mode, press
NOTE:
When the USB device isn't supported, it may be that the
power of the USB device isn't enough.
-11-
OSD
Language
Restore Factory Default
Blue Screen
HDMI CEC
Back
MENU
Input Source
TV
YPBPR
PC
HDMI1
HDMI2
VIDEO
USB
OK
Haier Innovation Life
MUSIC TEXT
USB2.0 EXIT Back
to make page up and page down.
TV OPERATION
Move OK
OK
MOVIE
OK
Move Select