Recording On A Tape Manually; Manual Recording - Sony MHC-RV990D Operating Instructions Manual

Recording on a tape
manually

— Manual Recording

You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see "Hooking up optional
components" on page 57).
1
Load a recordable tape into deck B.
2
Press DVD, TAPE A/B, TUNER/BAND,
GAME or MD (VIDEO) to select the
desired source to record.
• DVD: To record from this system's CD/
DVD player.
• Tape: To record from this system's tape
deck A.
• Tuner: To record from this system's
tuner.
• Game: To record from the connected
video game machine to GAME INPUT
AUDIO L/R jacks.
• MD (VIDEO): To record from the
connected MD or VCR to MD (VIDEO)
IN jacks.
3
Press REC PAUSE/START on the unit.
Deck B stands by for recording.
"REC" flashes.
4
Press DIRECTION on the unit
repeatedly to select "g" to record on
one side. Select "j" (or "RELAY") to
record on both sides.
5
Press REC PAUSE/START on the unit,
then start playing the desired source to
record.
Recording starts.
44 GB
To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• When you press REC PAUSE/START in step 3, the
surround effect may automatically change (see
"Selecting the surround effect" on page 46).
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after loading a recordable
tape. Press nN to start playback of the reverse
side, then press x when you want to start recording.
The TAPE B reverse side indicator lights up.
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective antenna to reduce the noise.
• When there is severe noise, set "DVD PWR OFF" by
DVD power manage function (page 40).