Functional Description - Makita JR3030 Instruction Manual

FUNCTIONAL DESCRIPTION
Adjusting shoe
When the blade loses its cutting efficiency
in one place along its cutting edge, reposi-
tion the shoe to unitize a sharp, unused
portion of its cutting edge. This will help to
lengthen the life of the blade. To reposition
the shoe, loosen the lever and slide the
shoe forward or back to the desired posi-
tion. Then tighten the lever to firmly secure
the shoe.
Loosen
r "
I
Shoe
Switch action
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the "OFF" position when released.
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop. For continuous operation, pull the trig-
ger and then push in the lock button. To
stop the tool from locked position, pull the
trigger fully, then release it.
Lock button
Switch trigger
6