Advertisement
Quick Links
See also:
Manual
ORDERING REPLACEMENT PARTS
To order replacement parts, contact your retailer for the nearest ICON Health and Fitness office, or write:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
Tel: Country Code: 0345-089009
Fax: 0113-2411120
To help us assist you, please be prepared to give the following information:
• The MODEL of the product (WESY50200).
• The NAME of the product (WEIDER
®
COBRA 1000 HOME GYM SYSTEM).
• The SERIAL NUMBER of the product (see the front cover of this manual).
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual).
Part No. 132907 R1297A © 1997 WEIDER is a registered trademark of ICON Health & Fitness, Inc.
Model No. WESY50200
Serial No.
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that
there are missing or damaged
parts, we will guarantee you
complete satisfaction through
our Customer Service
Department.
Please CALL:
0345-089009
Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.
Printed in Canada
Serial Number Decal
USER'S MANUAL
Advertisement
Related Manuals for Weider cobra 1000
Summary of Contents for Weider cobra 1000
-
Page 1: Ordering Replacement Parts
Read all precautions and instruc- USER'S MANUAL tions in this manual before using this equipment. Save this manu- al for future reference. Part No. 132907 R1297A © 1997 WEIDER is a registered trademark of ICON Health & Fitness, Inc. Printed in Canada... -
Page 2: Exploded Drawing
TABLE OF CONTENTS EXPLODED DRAWING—Model No. WESY50200 R1297A IMPORTANT PRECAUTIONS ............. .2 BEFORE YOU BEGIN . -
Page 3: Before You Begin
3/8” Nylon Locknut 1/4” x 2 1/2” Carriage Bolt Whether your goal is to tone your body, build dramatic be found on a decal attached to the COBRA 1000 (see 3/8” Washer Long Pad Tube muscle size and strength, or improve your cardiovas- the front cover of this manual). - Page 4 Do not use solvents. following information and instructions: instructed to do otherwise. • Place all parts of the COBRA 1000 in a cleared HOW TO TIGHTEN THE CABLES THE FOLLOWING TOOLS (NOT INCLUDED) ARE area and remove the packing materials;...
- Page 5 FOLDING THE BACKREST FOR STORAGE 2. Press a 1 1/2” Square Inner Cap (50) into the Right Stabiliser (47). Attach a Foot Plate (49) to Large First, lock the Press Arm Lever (8) in place at the top the Right Stabiliser with two 5/16” x 2” Bolts (48), Holes of the Weight Guides (see LOCKING THE PRESS two 5/16”...
- Page 6 5. Attach the Weight Guide Top (53) to the Weight ATTACHING THE LAT BAR OR NYLON STRAP TO Guides (38) with two 1/4” x 1 1/2” Bolts (61) and THE HIGH PULLEY STATION two 1/4” Nylon Locknuts (60). Attach the Lat Bar (24) to the Medium Cable (68) with Attach the Medium Cable (68) and the Weight a Cable Clip (72).
- Page 7 9. Wrap the Long Cable (18) around the 4 1/2” Pulley ADJUSTMENT (15). Attach the Pulley to the Pulley Brackets (9) with a 3/8” x 1 3/4” Bolt (22) and a 3/8” Nylon Locknut (2). The instructions below describe how each part of the home gym system can be adjusted. IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the correct starting position for the exercise to be performed.
- Page 8 13. Press a 2” Square Inner Cap (36) into the front of 17. Wet the ends of the Lat Bar (24) with soapy water. the Leg Lever (37). Attach both Leg Lever Brackets Slide a Handgrip (6) onto each end of the Lat Bar. (30) to the Leg Lever with two 5/16”...
- Page 9 REMOVE THIS PART IDENTIFICATION CHART FROM THE MANUAL This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled.