Enabling Wi-Fi Direct Mode - Epson XP-630 User Manual

To disconnect a peer-to-peer mode connection, release the connection to your product from your
computer or other device.
To enable peer-to-peer mode, you must select it from the Web Config Utility, under WiFi/Network
Settings > Services > Wi-Fi Direct.

Enabling Wi-Fi Direct Mode

Parent topic:
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. Press the
2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.
You see this screen:
3. Select Wi-Fi Direct Setup and press the OK button.
4. Select Connection Setup and press the OK button.
5. Press the down arrow button, then press the OK button to change the password.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the password.
Wi-Fi Networking
home button, if necessary.
37