Description
17 Replacement
of the drum unit
Figure
3.Remove the hose clamp from the outer tub, and
remove the feed hose A.
4.Remove the nineteen bolts mounting the outer
tub cover by a box wrench (size 10mm).
5.Pull out the outer tub cover to remove.
After remove the outer tub cover
1.Remove the cap by using minus-type screwdriver.
2.Remove a screw mounting the drum cover.
3.Remove the drum cover.
4.Remove the six bolts mounting the drum unit by
the box wrench (size 13mm).
4.Pull out the drum unit to remove.
-33-
NA-16VX1/16VG1/14VA1
Procedure