Rear - NEC PX803UL-WH User Manual

Rear

Exhaust vent
Heated aiir is exhausted
from here.
(→ page xi, 154)
Built-in Security Slot (
Terminals
(→ page 9)
* This security slot supports the MicroSaver
Security Bar
Fixing a theft prevention
device.
The security bar accepts
security wires or chains
up to 0.18 inch/4.6 mm in
diameter.
Handle (located on 4 posi-
tions)
For transportation
NOTE:
• For moving the projector,
make sure you have at least
two people. Attempting to
move the projector alone
could result in back pain
or other injuries.
)*
Security System.
®
Main power switch
While AC power is being supplied, set the
main power switch to ON position (|), then
your projector will enter a standby state.
7
1. Introduction
Controls
(→ page 8)
AC IN terminal
Connect the supplied
power cord's three-pin
plug here, and plug the
other end into an active
wall outlet. (→ page 14)
Power Cord Stopper
(→ page 16)
Theft prevention screw
hole for the lens unit
Intake vent
Takes in air to cool the unit.
(→ page xi, 154)