Alcatel onetouch Pixi 7 User Manual page 44

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
FCC RF Exposure Information (SAR):
This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the United States.
During SAR testing, this is set to transmit at its highest certified
power level in all tested frequency bands, and placed in positions that
simulate RF exposure in usage near the body with the separation
of 15 mm. Although the SAR is determined at the highest certified
power level, the actual SAR level of the device while operating can be
well below the maximum value. This is because the device is designed
to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6W/kg.
Tests for SAR are conducted using standard operating positions
accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this model
87
device with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
device is on file with the FCC and can be found under the Display
Grant section of HYPERLINK "http://www.fcc.gov/oet/ea/fccid"
www.fcc.gov/oet/ea/fccid after searching on FCC ID:2ACCJB014.
For this device, the highest reported SAR value for usage near the
body is:
Maximum SAR for this model and conditions under which it was
9006W (Body worn)
SAR compliance for body operation is based on a separation
distance of 15 mm between the device and the human body.
During use, the actual SAR values for this device are usually well
below the values stated above. This is because, for purposes of
system efficiency and to minimize interference on the network,
the operating power of your device is automatically decreased
when full power is not needed. The lower the power output of the
device, the lower its SAR value.
Body-worn SAR testing has been carried out at a separation
distance of 15 mm. To meet RF exposure guidelines during body-
worn operation, the device should be positioned at least this
distance away from the body.
If you are not using an approved accessory ensure that whatever
product is used is free of any metal and that it positions the device
the indicated distance away from the body.
Organizations such as the World Health Organization and the US
Food and Drug Administration have suggested that if people are
concerned and want to reduce their exposure they could use a
hands-free accessory to keep the wireless device away from the
head or body during use, or reduce the amount of time spent on
the device.
recorded:
1.44 W/kg
88