4-10
Climate control
! AUTO button
FULL AUTO mode operation:
When the "AUTO" button is pressed, the
indicator light "FULL AUTO" on the display
illuminates. In this state, fan speed, airflow
distribution, air-inlet control, and air con-
ditioner compressor operation are auto-
matically controlled.
AUTO mode operation:
If you operate any of the buttons on the
control panel other than the "OFF" button,
rear window defogger button and tem-
perature control dials during FULL AUTO
mode operation, the indicator light "FULL"
on the control panel will turn off and the
indicator light "AUTO" will remain illumi-
nated. You can then manually control the
system as desired using the button you
operated. To change the system back to
the FULL AUTO mode, press the "AUTO"
button.
! OFF button
The automatic climate control system
turns off (the air conditioner compressor
and fan turn off) when the "OFF" button is
pressed.
When the "OFF" button is pressed, the
outside air mode (air inlet selection OFF)
is automatically selected.
! Temperature control dial
To increase the temperature setting, turn
the temperature control dial clockwise. To
decrease the temperature setting, turn the
dial counterclockwise.
Each temperature setting is shown on the
display.