Rear Seats - Subaru 2011 Forester Quick Reference Manual

HI – Rapid heating
1)
LO – Normal heating
2)
OFF – Off
3)
A) Left-hand side
B) Right-hand side
The seat heater operates when the igni-
tion switch is either in the "Acc" or "ON"
position.
To turn on the seat heater, press the "LO"
or "HI" position on the switch, as desired,
depending on the temperature.
Selecting the "HI" position will cause the
seat to heat up quicker.
To turn off the seat heater, lightly press the
opposite side of the current position.
The indicator next to the switch illuminates
when the seat heater is in operation.
When the vehicle's interior is warmed
enough or before you leave the vehicle,
be sure to turn the switch off.
Seat, seatbelt and SRS airbags

Rear seats

WARNING
Seatbelts provide maximum re-
straint when the occupant sits well
back and upright in the seat. Do not
put cushions or any other materials
between occupants and seatbacks
or seat cushions. If you do so, the
risk of sliding under the lap belt and
of the lap belt sliding up over the
abdomen will increase, and both can
result in serious internal injury or
death.
– CONTINUED –
1-7