Replacing The Handset Battery Pack - AT&T 6100 User Manual

6100_book_1ATT 11/25/00
HEADLINE LEFT BATTERIES
HEADLINE L-SUB

Replacing the Handset Battery Pack

1 Remove the battery compartment cover on the handset by
pressing on the indentation and sliding the cover downward.
2 Lift out the old battery pack and disconnect.
3 Align the two holes in the new battery pack's plug with the
socket pins, and snap the plug into place. Place the battery pack in the
compartment with the wires in the lower left corner, along the bottom
of the battery pack.
4 Replace the cover by sliding it up into place.
5 The new battery pack must be charged before using the phone.
Place the handset in the base and allow it to charge for at least
24 hours the first charge. The telephone might operate before that,
but for best performance, let the battery pack charge fully.
14
12:37 PM Page 14