Making N In 1 Copies Or A Poster - Brother DCP-T300 Advanced User's Manual

Chapter 7
Making N in 1 copies or a
poster (Page Layout)
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature, your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
NOTE
Sort, Enlarge/Reduce - MFC-T800W
(Enlarge/Reduce - DCP-T300,
DCP-T500W and DCP-T700W) and
Remove Bkg. Clr are not available with
Layout(2in1 ID).
a
Load your document.
b
(MFC models only)
Press (COPY).
c
Enter the number of copies you want.
1
You can only make one copy at a time when
you are using Poster layout.
d
Press Copy Options and a or b to
choose Layout(2in1 ID).
Press OK.
e
Press a or b to choose Off(1in1),
2in1(P), 2in1(L), 4in1(P),
4in1(L), Poster(3x3) or
1
.
2in1(ID)
Press OK.
1
For information about 2 in 1 (ID), see 2 in 1 ID
copy (Page Layout) on page 21.
20
f
If you do not want to change additional
settings, press Mono Start or
Color Start to scan the page.
7
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
1
DCP-T700W and MFC-T800W only
If you are using the scanner glass, go
to step g.
g
(MFC-T800W)
After the machine has scanned the
page, press 1 to scan the next page.
(DCP-T300, DCP-T500W and
DCP-T700W)
After the machine has scanned the
page, press a to scan the next page.
h
Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps g and h for each page of
the layout.
i
(MFC-T800W)
After all the pages have been scanned,
press 2 to finish.
1
(DCP-T300, DCP-T500W and
DCP-T700W)
After all the pages have been scanned,
press b to finish.
NOTE
• Make sure the paper size is set to A4 or
Letter.
• You can only make one color copy at a
time.
• You can only make one Poster copy at a
time.
• (P) means Portrait and (L) means
Landscape.
1