Minimum Clearance To Combustible Enclosures - Napoleon GD82PT-PAE Installation And Operating Instructions Manual

28
5.2

MINIMUM CLEARANCE TO COMBUSTIBLE ENCLOSURES

EN
THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALS
SUCH AS BRICK, MARBLE, GRANITE, ETC., AS LONG AS THE FINISHING MATERIAL DOES NOT GO
BELOW THE SPECIFIED DIMENSION AS ILLUSTRATED. AS AN ALTERNATIVE, YOU CAN FINISH THE
FACING AND / OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
THE APPLIANCE REQUIRES A MINIMUM ENCLOSURE HEIGHT MEASURED FROM THE APPLIANCE
IMPORTANT: The GD82 requires a minimum inside enclosure height of 72" (1829mm), measured from
the bottom of the appliance. For temperature requirements, this area must be left unobstructed.
1829mm
* See "VENTING" section.
W415-1407 / 11.20.14
APPLIANCE WITH DRYWALL, SEE DIAGRAM BELOW FOR DETAILS.
COMBUSTIBLE
8"
26" 203mm
660mm
12 1/4"
311mm
72"
10 1/8"
257mm
NON-COMBUSTIBLE
WARNING
!
RISK OF FIRE!
BASE.
COMBUSTIBLE NON-COMBUSTIBLE
BRICK
2"
51mm
INSULATION
SLEEVE
51mm
1"
25mm
0" IF NON-
2"
COMBUSTIBLE
51mm
FINISHING IS
USED SUCH AS
BRICK AND STONE.
2"
56"
1422mm
MINIMUM
PLUS RISE*