Sony SLV-X827AS Operating Instructions Manual page 7

Manufacturer Code number
Schneider 46
Seleco 14
Sharp 29
Siemens 39
Sinudyne 37
TEAC 67
You can use the WIDE button after entering a code number with any of the
following marks;
1
* : Press WIDE to switch the wide picture mode on or off.
* 2 : Press WIDE, then press VOL+/– to select the wide picture mode you
want.
3
* : Press WIDE. The menu appears on the TV screen. Then, press CURSOR
>/./?// to select the wide picture you want and press EXECUTE.
Notes
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote commander, the code number
automatically resets to 01 (Sony). Reset the appropriate code number.
Manufacturer Code number
Telefunken 36
Thomson 43* 2
Toshiba 38
White
Westinghouse 34
Getting Started
SLV-X827AS/NZ 3-858-668-11 (1)
7