Setting The Timer Manually - Sony SLV-X827AS Operating Instructions Manual

Setting the timer
manually
If G-CODE is not available in your area,
follow the instructions below to set the
timer to record programmes.
Before you start...
• Check that the VCR clock is set to the
correct time.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
• Turn on your TV and set it to the
video channel.
INPUT SELECT
1
• MENU
Press MENU and select TIMER SET/
CHECK, then press EXECUTE.
• CURSOR
• EXECUTE
2
Set the date, start and stop times,
programme position, and tape speed:
• CURSOR
1 Press CURSOR / to highlight each
2 Press CURSOR >/. to set each item.
To correct a setting, press CURSOR ? to
return to that setting and reset.
34
Basic Operations
item in turn.
u
(on/standby)
MENU
EXECUTE
CURSOR
> / . / ? / /
1 2 3
4 5 6
7 8 9
0
TIMER SET / CHECK
DATE START STOP PROG
– – . – – : – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
TIMER SET / CHECK
DATE START STOP PROG
10 . 12 WED – : – –
– – . – – : – –
– – . – – : – –
: –
– – . – – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
– – . – – : – –
SLV-X827AS/NZ 3-858-668-11 (1)
9 . 12 TUE
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
9 . 12 TUE
– : – – – – SP
– : – – – – –
– : – – – – –
:
– – – – – –
– : – – – – –
– : – – – – –
– : – – – – –
– : – – – – –