Mitsubishi Electric EX100U User Manual page 2

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTA-
CLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTE:
SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
WARNING
Use the attached specifi ed power supply cord. If you
use another power supply cord, it may cause interfer-
ence with radio and television reception.
Use the attached RGB cable or RS-232C cable with this
equipment so as to keep interference within the limit of
an FCC Class B device.
This apparatus must be grounded.
DO NOT LOOK DIRECTLY INTO THE LENS WHEN
THE PROJECTOR IS IN THE POWER ON MODE.
CAUTION
Not for use in a computer room as defi ned in the Stand-
ard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
EN - 2
RISK OF ELECTRIC SHOCK
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of suffi cient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operating and maintenance (servicing) instructions in the literature accom-
panying the appliance.
CAUTION
DO NOT OPEN
SHOCK,
When using the projector in Europe:
COMPLIANCE NOTICE
This Projector complies with the requirements of the EC
Directive 89/336/EEC "EMC Directive" as amended by
Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC
"Low Voltage Directive" as amended by Directive 93/68/
EEC.
The electro-magnetic susceptibility has been chosen at
a level that gains proper operation in residential areas,
on business and light industrial premises and on small-
scale enterprises, inside as well as outside of the
buildings. All places of operation are characterised by
their connection to the public low voltage power supply
system.
WARNING
Use the attached RGB cable or RS-232C cable with this
equipment so as to keep interference within the limits of
an EN55022 Class B device.
Please follow WARNING instructions.