Mitsubishi Electric EX100U User Manual page 17

3 FEATURE
MENU POSITION ................... Use to select the position of the menu on the
CINEMA MODE ...................... When AUTO is selected, the fi lm mode will be
VIDEO SIGNAL ....................... When AUTO is selected, the appropriate video
ANAMORPHIC ....................... Select ON when playing DVD discs containing data of widescreen images.
PASSWORD FUNCTION ........ Use to change the mode of the password lock or to enable or cancel the password
LANGUAGE ............................ Use to select the language used in the menu. (
RESET ALL ............................. Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).
• CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.
• When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of
VIDEO SIGNAL depending on the input signal in such cases.
4 SIGNAL
HORIZ. POSITION .................. Use to adjust the horizontal position of the image.
VERT. POSITION .................... Use to adjust the vertical position of the image.
FINE SYNC. ............................ Use to synchronize the projector with the PC input
TRACKING ............................. Use to eliminate image noise such as wide stripes.
COMPUTER INPUT ................ The projector adjusts its settings automatically
SET UP ................................... When OFF is selected, the black area becomes
HOLD ..................................... Use to adjust the image when fl agging occurs near the top of the screen.
5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH ...................... Use to correct solid white or solid black in the
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
screen, 1. (upper left) or 2.
automatically activated when a fi lm source signal
is inputted. When OFF is selected, the fi lm mode
will not be activated.
format is automatically selected depending on the
input signal. If the image isn't displayed correctly,
select the desired video format manually.
lock. See page 21 for details.
Français / Italiano / /
signal so that the image is not blurred.
when connected to a DVD player equipped with
a component video output (Y, C
projector is connected with a device having an
RGB terminal, choose RGB manually.
make lighter. When 3.5% or 7.5% is selected, the
black area becomes thicker.
projected image.
FEATURE
(lower right).
?
A
Ë
/ English / Español / Deutsch /
/ / PORTUGUÊS).
SIGNAL
, C ). When the
B R
R G B
R G B
opt.
XGA60
MENU POSITION 1.
AUTO
CINEMA MODE
AUTO
VIDEO SIGNAL
ON
ANAMORPHIC
PASSWORD
MENU ACCESS
FUNCTION
LANGUAGE English
RESET ALL OK
opt.
XGA60
HORIZ. POSITION 0
VERT. POSITION 0
FINE SYNC. 0
TRACKING 0
COMPUTER
RGB
INPUT
SET UP 7.5%
HOLD ON
USER OK
USER
CLAMP
0
POSITION
CLAMP WIDTH 1
EN - 17