Marshall Amplification Field Marshall 100 Owner's Manual page 6

Field Marshall Tracking Receiver
4
Reach f orward and
extend the forward elements until it clicks into place.
Finally, pull the director elements out forward until they click at their ex-
tended position. The yagi is now fully extended and ready for use.
The antenna won't give its best range and pin-point
accuracy unless fully deployed as shown in the
picture above.
To collapse the antenna, follow the same steps in reverse:
- Slide the Slide Bar with the two Forward Elements
back toward the receiver.
- Rotate the Center Elements into their collapsed
position.
- Rotate the two Back Elements and click them into their
silver clips.
Page 6
pull the slide bar forward
to f ully