Getting Started - Marshall Amplification Field Marshall 100 Owner's Manual

Getting Started

The f irst thing to understand is how to deploy the collapsible y agi antenna,
which is a full-size three element Y agi Antenna for maxi mu m range and
pin-point accuracy, using Marshall's patented design.
First, remove your receiver from your
field holster or backpack.
2 Push forward on the rear
of the slide bar.
loaded elements will automatically
(instantly!) f lip out into the open position.
Warning: to avoid injury be sure to keep a
careful distance from your face or
others when performing this procedure.
Next, lift the ends of the center
elements, one at a time, up from
their notched holders. They will pop
out into their correct positions.
1
Remove the receiver
from whatever carry ing case you
are using (hunting bag, holster or
carry ing case) and hold it pointing away .
The spring-
Second, push forward on the rear of
the slide bar to release the spring-
loaded elements out into position.
3
Lift the Center Elements
up and out of their slots one at a
time and let them spring open
Ow ner's Manual
.
Page 5