Operating Instructions
Forced Operation
The operation will be started operation if the power button is pressed without remote controller.
If you want to stop operation, re-press the button.
Power
button
Open the front
panel upward
Cooling Model
Operating mode
Indoor FAN Speed
Setting Temperature
Auto restart
In case the power comes on again after a power failure, the unit operates automatically to the previous
operating conditions.
So there is no need of activating this function by pressing any key or button.
In the initial mode, the fan operates at a low speed and the compressor starts about 3 minutes later.
As the compressor starts, the fan speed also resumes its previous setting mode.
In case of absence for a long time while power failure, turn off main power to avoid
undersired Auto restart.
Helpful information
Fan speed and cooling capacity.
The cooling/heating capacity indicated in the specification is the value when the fan speed is set to high,
and the capacity will be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool/heat the room quickly.
20 Multi Type Air Conditioner
Power button
Room Temp. ≥ 24°C
Cooling
Cooling
High
High
22°C
22°C
Heat pump Model
21°C ≤ Room Temp. < 24°C
Healthy Dehumidification
High
23°C
Power
button
Room Temp. < 21°C
Heating
High
24°C