Lcd Display; Setting Up Your Scale - Detecto D228 User Manual

LCD DISPLAY

Fat %
Muscle %
Gender
User Memory Code

SETTING UP YOUR SCALE

1. Locate the pound/kilogram (lb/kg) button under the scale
near the top of the scale. Select lb or kg weight reading
as desired. The scale will now weigh in pounds or
kilograms as indicated.
2. Press ON/SET button once. The user number will start flashing.
Select user number by pressing the two arrow buttons on the
right side to move the number up or down. Press the ON/SET
button when the desired user number is shown.
(Note: Up to 12 users can be programmed.)
3. After the ON/SET button is pushed, the gender icon will start flashing. Press the up or down
arrow to move between male and female. Press the ON/SET button.
4. In similar fashion, the display will prompt you to set your height and age. Press the
ON/SETbutton after the proper information is shown to move to the next flashing
display.Press START button once all information has been entered.
Height Unit
Hydration %
Bone %
Age
Fat Status Indication
At the bottom of scale, you can
find a unit conversion button as
shown in picture
Weight Unit
Calorie Unit
3