Front Control Panel - Mitsubishi WD-52327 Owner's Manual

Front Control Panel

The buttons on the Front Control Panel highlighted in gray are duplicated on the remote control. The top row of
labels show the control functions when there are no TV menus displayed on the screen. The bottom row of labels
show the control functions when the TV menus are displayed on the screen or when a special function has been
activated. See Remote Control Overview, for further details on the functions of these buttons.
LAMP STATUS TIMER
Indicators
Please refer to the table below for conditions when the indicator lights will display.
COLOR
None (off)
Green (steady light)
Green (blinking light)
Yellow (steady light)
Yellow (blinking light)
Red (steady light)
Red (blinking light)
A/V Reset
Press this button to reset all A/V memory inputs to the factory default.
Input-3
This input can be used for convenient connection of a camcorder or
other video device to the TV. You may connect to the S-VIDEO or
VIDEO terminal but not to both.
– VOL –
POWER
LAMP INDICATOR
Power off
n/a
Power just turned off, TV
cooling down (1 minute).
Cannot turn the TV back on
until blinking stops.
Lamp life end warning.
A new lamp should be
purchased.
See Appendix F.
Lamp cover door is open
or
no lamp installed.
See Appendix F.
Lamp has failed,
replacement is required.
See Appendix F.
n/a
FORMAT
– CH –
< >
ADJUST
STATUS INDICATOR
Power off
n/a
n/a
Operating temperature is too high.
The dust filter may be dirty. See Appendix E.
or
The room temperature too hot. Turn off TV until
the room is cooler.
The filter cover is open or not secure.
See Appendix E.
Service required.
Turn off TV and call your dealer or a
Mitsubishi Authorized Service Center. See
www.mitsubishitv.com or call 1-800-332-2119.
Service required.
Turn off TV and call your dealer or a
Mitsubishi Authorized Service Center. See
www.mitsubishitv.com or call 1-800-332-2119.
MENU
A/V RESET
ENTER
MENU CANCEL
TIMER/
POWER
Power off
Power on
TV Timer is set
n/a
n/a
n/a
n/a
� � ����� � � �����
INPUT
�������
9