Table of Contents
Advertisement
Forward facing ⎯ Convertible seat
■
Run the seat belt through the
child seat and insert the plate
into the buckle. Make sure that
the belt is not twisted.
Fully extend the shoulder belt
and then allow it to retract
slightly in order to activate the
ALR lock mode.
Lock mode allows the seat belt to
retract only.
While pushing the child seat
down into the rear seat, allow the
shoulder belt to retract until the
child seat is securely in place.
After
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
Place the child seat on the seat
facing the front of the vehicle.
I n f o r ma t i o n P r o v i d e d b y :
1-7. Safety information
the
shoulder
belt
1
has
107
Advertisement
Table of Contents
