Sound - Mitsubishi WD-73CLL Supplemental Owner's Manual

14 2. TVMenus
Sound
Sound
Audio
Settings in this menu are saved for the current input only with the exception of Balance,
which applies to all inputs. Press 4 _ to make changes and then press MENUto return to the
menu screen.
To make Audio adjustments while watching TV and without using the menu:
1. Press the AODlOkey.
2. Press A V to select an audio option.
3. Press 4t _ to change the setting.
TV Speakers On Turns on the internal TV speakers.
Bass
Off Turns off the internal TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an A/V receiver, be sure to change the Sound setting
to TV to hear sound from the TV speakers.
Controls volume of low-pitched sound from the TV speakers.
Treble
Balance
Sound Mode
Level Sound
Listen To
(applies only
to analog
channels from
the ANT input)
Controls volume of high-pitched sound from the TV speakers.
Controls audio balance between the right and left TV speakers
Stereo No special audio effects from the TV speakers
Surround Modifies audio from the TV speakers.
• For monaural (non-stereo) programs, creates a simulated stereo effect.
For stereo programs, creates a simulated surround sound effect.
On, Off Reduces differences in sound volume between programming segments, such as the
difference between regular broadcast programs and commercial segments.
Mono Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
Stereo is displayed when you tune to a channel broadcasting in stereo.
SAP Selects an additional monaural sound track not audible during normal TV viewing.
(Second Audio The SAP signal might be related to the program (such as a sound track in a foreign
Program) language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
For assistance call 1(800} 332-2119