Toyota 2016 PRIUSC Service Manual page 529

Hybrid battery (traction battery)
Type
Voltage
Capacity
Quantity
Overall voltage
Lubrication system
Oil capacity (Drain and
refill reference
With filter
Without filter
*
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up the engine and turn off the hybrid system, wait
more than 5 minutes, and check the oil level on the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use
Toyota approved "Toyota Genuine Motor Oil" or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice
for good fuel economy and
good starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.
PRIUS c_U (OM52F96U)
Nickel-metal hydride battery
7.2 V/module
6.5 Ah (3HR)
20 modules
144 V
*
)
3.9 qt. (3.7 L, 3.3 Imp. qt.)
3.6 qt. (3.4 L, 3.0 Imp. qt.)
9-1. Specifications
Outside temperature
529
9