Record Your Announcement - AT&T 1480 User Manual

91-5824-70-00_ATT1480_R0
ANSWERING SYSTEM OPERATION
Enter
answering
system
feature
setup and
choose a
feature
to set
Change
a feature
setting
Confirm a
feature setting
Announce Only" on page 22 to change your announcement selection.

Record Your Announcement

NOTE: If you have assigned different mailboxes to different people, be
sure to tell callers in your announcement to press 1, 2, or 3 to leave
a message in the appropriate mailbox.
Press U until you hear "Change announcement. "
1
Press /. After you hear "Now recording" followed by a
2
beep, speak toward the base to record an announcement up to 90
seconds long.
3
Press any MBOX/STOP button to stop recording. The system plays
back your recorded message.
To review your announcement at any time:
Press U until you hear "Change announcement. "
1
2
Press any MBOX/STOP button.
To delete your announcement:
Press D during announcement playback. The system will use the
pre-recorded announcement until you record a new one.
9/15/03 2:47 PM Page 21
Delete outgoing
announcement, messages
AT THE BASE
Turn
answering
system on
or off
Record
outgoing
announcement
21