Edit A Number/Name Stored In The Directory - AT&T 1480 User Manual

91-5824-70-00_ATT1480_R0
When you finish entering the name, press S.
4
The screen displays ENTER NUMBER.
Enter the telephone number. Use < to backspace and make
5
a correction. Press r to store a pause in the dialing
sequence.
—OR—
Press r to display the last number dialed from
this phone.
Press S. If you are using the base, you are now done. If you
6
are using the handset, the screen displays DISTINCT RING? and
the current setting.
Press < or > to change the setting. Choose Y (for Yes) if you
7
wish the phone to alert you to calls from this number by changing
to a distinctive ringing pattern after the first ring. Choose N (for
NO) for a normal ringing pattern.
Press S to confirm your selection. If you chose Y in Step 7, a
8
D will be displayed with the directory entry.
Note: When memory is full the screen displays MEMORY FULL, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.

Edit a Number/Name Stored in the Directory

Press > (DIR). The screen displays DIRECTORY.
1
Press < or > to scroll alphabetically through entries
2
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
3
When the screen displays the number you want to edit, press
S. Then press < or > until EDIT flashes.
E E D D I I T T DIAL ERASE
973-555-0123
Press S. The screen displays the name and number. The
4
flashing cursor appears at the end of the name. Use <, > and
the dial pad keys to edit the name. Press S to move on to
edit the number. Press S to move to edit the Distinctive
Ring setting.
Press S to save the edited information.
5
9/15/03 2:47 PM Page 15
TELEPHONE DIRECTORY
AT THE BASE OR HANDSET
15